Associate Professor Preethi Preethichandra Engineering / School of Engineering and Technology

Assoc Prof/DL - Mechatronics

BSc.Eng, MEng, MEBM, PhD

Contact Details

Email: d.preethichandra@cqu.edu.au

Phone: (07) 4940 7541 - Ext: 57541

Office Location

About Me

Professional Experience
Prefessional Engineer in Electrical and Electronics
Professional Memberships

Senior Member, IEEE

Corporete member and Chartered Engineer, Institute of Engineers, Sri Lanka
Responsibilities
Discipline Leader, Electrical Engineering, CQU
Computer Software
C, Pascal, Fortran, VB, LabView, MatLab, Multisim, ProEng
Papers in Refereed Proceedings
D.M.G.Preethichandra, “Ultra Low Power Indoor Air Quality Monitoring Sensor Network”, 2nd International Conference on Sustainable Built Environment (ICSBE2012), December, 2012, kandy, Sri Lanka.
Published in: 2012
D.M.G.Preethichandra, E.M.I.mala Ekanayake and K. Kaneto, “Enhanced Glucose nano-Biosensor by Pulsed deposition of Conducting Polymer on ITO/Pt”, International Symposyum on medical Measurements and Applications(MeMEA2012), May, 2012 Budapest, Hungary
Published in: 2012
D.M.G.Preethichandra, E.M.I.mala Ekanayake and K. Kaneto, “Characteristics of Glucose Biosensors with Glucose Oxidase Deposited Under High Electric Field”, International Instrumentation and Measurement Technology Conference, (I2MTC2012), May, 2012, Graz, Austria
Published in: 2012
D.M.G.Preethichandra, E.M.I.mala Ekanayake and K. Kaneto, “Development of Low-Cost Nano-Biosensors to Enhance the Rural Healthcare Services”, 6th Intl. Coference on Sensing Technology (ICST2012), December, 2012, Kolkata, India
Published in: 2012
B. G. L. T Samaranayake, D. M. G Preethichandra, A. M. U. S. K Alahakoon, and K. Kaneto, “Dynamic Modelling of Ionic Polymer Metal Composite using Equivalent Passive Electric Network Components”, International Conference on Management Manufacturing and Materials Engineering (ICMMM), Dec., 2011, Zhengzhou, China
Published in: 2011
E.M.I. Mala Ekanayake, D.M.G. Preethichandra and Keiichi Kaneto, “Study on characteristic dependency of nano-templated Glucose Biosensors upon Glucose Oxidase immobilizing techniques”, Fourth Intl. Conf. on Molecular Electronics and Bioelectronics, Tokyo, March, 2007
Published in: 2007
E.M.I. Mala Ekanayake, D.M.G. Preethichandra and Keiichi Kaneto, “Amperometric biosensor Based on naoporous Polypyrrole for Fast Sensing of Glucose”, 68th Autumn meeting of Japan Society of Applied physics,. Hokkaido, Japan, Sept. 2007
Published in: 2007
B. G. L. T Samaranayake, D. M. G Preethichandra, A. M. U. S. K Alahakoon and K. Kaneto, “Modeling Simulation and Design of Ionic Polymer Metal Composite Soft Actuators”, ICIIS2007, Sri Lanka, August 2007
Published in: 2007
B. G. L. T Samaranayake, D. M. G Preethichandra, A. M. U. S. K Alahakoon and K. Kaneto, “Bending Curve Modeling of Ionic Polymer Metal Composites in Soft Actuator Applications” IEEE Intl. Conf. on Inst. & Meas. (IMTC2007), Warsaw, Poland, May 2007
Published in: 2007
E.M.I. Mala Ekanayake, D.M.G. Preethichandra and Keiichi Kaneto, “Enhanced Adsorption of Glucose Oxidase by Introducing Artificial Porosity into Polypyrrole Based Glucose Biosensors” IEEE Intl. Conf. on Inst. & Meas. (IMTC2007), Warsaw, Poland, May 2007
Published in: 2007
E.M.I. Mala Ekanayake, D.M.G. Preethichandra and Keiichi Kaneto, “Fabrication and Characterization of nano-Structured Conducting Polymer Electrodes for Glucose Biosensor Applications”, ICIIS2007, Sri Lanka, August 2007
Published in: 2007
D.M.G. Preethichandra, A.K. Thakur, W. Takashima and K. Kaneto, “An ionic polymer-metal composite sensor for bending curvature measurements”, The International Conference on Science and Technology of Synthetic Metals(ICSM), Ireland. July, 2006
Published in: 2006
D.M.G. Preethichandra, M. Kunifusa, A.K. Thakur, W. Takashima and K. Kaneto, “Polymer actuators synthesized under a high transverse electric field”, The International Conference on Science and Technology of Synthetic Metals(ICSM), Ireland. July, 2006
Published in: 2006
D.M.G. Preethichandra, A.K. Thakur, W. Takashima and K. Kaneto, “An easy Fabrication Method for Artificial Muscles Using Ionic Polymer Metal Composites.”, First Internatioanl conference on Industrial and Information Systems, Sri, Lanka, August, 2006
Published in: 2006
D.M.G. Preethichandra, W. Takashima, K.Kaneto, “Linear Bipolar actuator with unidirectional actuation”, 3rd International Symposium on Macro and Supramolecular Architectures and Materials (MAM-06) May, 2006 Tokyo
Published in: 2006
D. M. G. Preethichandra and K. Kaneto, “Surface Profile Sensing with Matrixed Conducting Polymers”,Technical report of IEICE, pp 11-14, 2005
Published in: 2005
D. M. G. Preethichandra and K. Kaneto, “Bending Curvature Measurement Using a SAW Sensor Fabricated on a Polyvinilidyne Difluoride (PVDF) Substrate”, Procedings of 1st International conference on Sensing Technology, New Zealand, pp594-597, 2005
Published in: 2005
D.M.G. Preethichandra, Masakatsu Kunifusa, Wataru takashima, Keiichi Kaneto, “The Influence of a Transverse Electric Field on Electrodeposited Conducting Polymers”, 53rd Spring Meeting of JSAP, Tokyo, Pp 1294, August, 2005
Published in: 2005
D.M.G. Preethichandra, “Development of a tele-operational prosthetic hand to imitate an expert's hand via internet”, CIMCA’2004, Gold Coast, Australia, 12-14, July 2004
Published in: 2004
D.M.G. Preethichandra, J. Billingsley, “A Stair-Climbing Wheelchair for Motor Accident Victims”, CIMCA’2004, Gold Coast, Australia, 12-14, July 2004
Published in: 2004
D.M.G. Preethichandra, A. Hsu, D. Alahakoon, S.K. Halgamuge, “A modified dynamic self-organizing map algorithm for efficient hardware implementation”, FSKD02, Sigapore,18th–22nd Nov, 2002
Published in: 2002
D.M.G. Preethichandra, K.Shida, “A single sensor with four functions for engine oil condition monitoring” Senkoku Keisou kenkyukai (Japanese National Conference on Measurements), Saga University, Japan, 5th-6th Oct. 2000
Published in: 2000
D.M.G. Preethichandra, K.Shida, “Optimum use of engine oil though multi-functional sensing and a fuzzy based decision making algorithm”, KACC2000, Seoul, Korea, 18th-23rd Oct. 2000. (Best Presentation Award)
Published in: 2000
D.M.G. Preethichandra, K.Shida “A simple interface circuit to measure very small capacitance changes in capacitive sensors”, IMTC2000, Baltimore, U.S.A., 1st-4th May 2000
Published in: 2000
D.M.G. Preethichandra, K.Shida, “Actual condition monitoring of engine oil through an intelligent multi-functional sensing approach”, IECON2000, Nagoya, Japan, 22nd-28th Oct. 2000
Published in: 2000
K.Shida, D.M.G. Preethichandra, “A multi-functional sensor for detecting engine oil condition”, JJAP symposium, Sapporo, Japan, 6th Sep. 2000
Published in: 2000
Invited Papers/Speaker
Keynote Speaker - “Conducting Polymer Based Biosensors”, 2nd National Workshop on Instrumentation and Measurement, IEEE IMTC New Zealand Chapter, 1st - 2nd , Sept., 2010, Wellington, New Zealand.
Published in: 2010
Refereed Articles
B. G. L. T Samaranayake, D. M. G Preethichandra, A. M. U. S. K Alahakoon, and K. Kaneto, “Dynamic Modelling of Ionic Polymer Metal Composite using Equivalent Passive Electric Network Components”, Advanced Materials Research Vols. 452-453 (2012) pp 1159-1163
Published in: 2012
Sanath Alahakoon, D. M. G. Preethichandra, E.M.I. Mala Ekanayake, “Sensor Network Applications in Structures – A Survey”, Electronic Journal of Structural Engineering, Volume 9, Special Issue, pp1-10, 2009
Published in: 2009
E.M.I. Mala Ekanayake, D.M.G. Preethichandra, Keiichi Kaneto, “Effect of Glucose Oxidase Immobilizing Techniques on Performances of Nano Scale Polypyrrole Glucose Biosensors, Japanese Journal of Applied Physics. (Vol. 47, No. 2, 2008, pp. 1321-1324)
Published in: 2008
E.M.I. Mala Ekanayake, D.M.G. Preethichandra, Keiichi Kaneto, “Bi-functional amperometric biosensor for low-concentration hydrogen peroxide measurements using polypyrrole immobilizing matrix”Sensors and Actuators B, Volume 132, Issue 1, 2008, pp. 166-171
Published in: 2008
E.M.I. Mala Ekanayake, D.M.G. Preethichandra, Keiichi Kaneto, “An Amperometric Glucose Biosensor with Enhanced Measurement Stability and Sensitivity Using Artificially Porous Conducting Polymer”, IEEE Transaction on Instrumentation and Measurement. Vol. 57, No.8, 2008, pp. 1621-1626
Published in: 2008
D.M.G. Preethichandra, A.K. Thakur, W.Takashima, K. Kaneto, “A combined bi-ionic polymer actuator with unidirectional extension against bipolar excitations.”, Sensors and Actuators – B, Volume 122, Issue 2, 26 March 2007, pp. 587-590
Published in: 2007
A.K. Thakur, A.K. Mukherjee, D.M.G. Preethichandra, K. Kaneto, “Charge Injection Mechanism Across Au-poly(3-hexylethiophene-2,5-diyl) interface”, Journal of Applied Physics, 101, 104508(2007)
Published in: 2007
E.M.I. Mala Ekanayake, D.M.G. Preethichandra, Keiichi Kaneto, “Polypyrrole Nanotube Array sensor for Enhanced Adsorption of Glucose oxidase in Glucose Biosensors” , Biosensors and Bioelectronics, Vol. 23, Issue 1, 30 August 2007, pp. 107-113
Published in: 2007
D.M.G. Preethichandra, K. Kaneto, “ SAW Sensor Network Fabricated on a Polyvinylidine Difluoride (PVDF) Substrate for Dynamic Surface Profile Sensing”, IEEE Sensor Journal, 7 (2007) pp. 646-650
Published in: 2007
D.M.G. Preethichandra, K.Shida, “A Multi-Functional Sensor for Liquid Characterization and Identification”, Japanese Journal of Applied Physics, Vol.40(2001), No.3A, Part I, pp 1482-1486.
Published in: 2001
D.M.G. Preethichandra, K.Shida, “A simple interface circuit to measure very small capacitance changes in capacitive sensors”, IEEE Transaction on Instrumentation and Measurement, Vol. 50, No.6, Dec. 2001, pp 1583-1586.
Published in: 2001
D.M.G. Preethichandra, K.Shida, “A multifunctional sensor for automobile engine oil condition monitoring”, Transactions of Institute of Electrical Engineers, Japan, Vol. 119-E(1999), No.4, pp 184-188
Published in: 1999
Research Interests
Nanotechnology based sensors and actuators, Sensor development, sensor networking, Embedded systems development, Robotics
ENGINEERING
Electrical and Electronic Engineering - Control Systems, Robotics and Automation
Sensor Development, Sensor Networking, Embedded System Development
ENGINEERING
Biomedical Engineering - Biomedical Instrumentation
Glucose Nano-Biosensors
Other Engineering - Engineering Instrumentation
Sensor development, Sensor network development, and Embedded system development
Interdisciplinary Engineering - Interdisciplinary Engineering not elsewhere classified
Mechatronics
TECHNOLOGY
Nanotechnology - Nanofabrication, Growth and Self Assembly
Nanotechnology based sensors and actuators
Conference paper

Janse Van Rensburg, P. A., Izhar, U., & Preethichandra, D. M. G. (2018). A novel PLC impedance conditioning technique for quasi-common mode power-line antenna injection. In 2018 IEEE 27th International Symposium on Industrial Electronics (ISIE): proceedings (pp. 677-682). Piscataway, NJ: IEEE. doi:10.1109/ISIE.2018.8433833

Link to ACQUIRE

Onoda, M., & Preethichandra, D. M. G. (2017). Detection of environmental pollutants with oxidoreductases. In Proceedings of the 2017 International Symposium on Electrical Insulating Materials (ISEIM 2017) Vol. 2 (pp. 449-452). Piscataway, NJ: IEEE. doi:10.23919/ISEIM.2017.8166527

Link to ACQUIRE

Preethichandra, D., & Ekanayake, M. (2015). Nano-structured polypyrrole as a low-cost substrate for glucose biosensing applications in rural health. In 2015 IEEE International Symposium on Medical Measurements and Applications (MeMeA): Proceedings. (pp. 397-401). Piscataway, NJ.: IEEE. doi:10.1109/MeMeA.2015.7145235

Link to ACQUIRE

Preethichandra, D. (2014). Environmental gas sensing in complex environments. In 2014 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 12-15 May, Montevideo, Uruguay. (pp. 1480-1483). Piscataway, NJ: IEEE. doi:10.1109/I2MTC.2014.6860991

Link to ACQUIRE

Preethichandra, D., & Onoda, M. (2014). Polypyrrole based nano-biosensor for sensing low concentrations of hydrogen peroxide. In Proceedings of the 2014 eighth International Conference on Sensing Technology, 2-4 September 2014, Liverpoon, U.K. (pp. 159-162). Palmerston North, NZ: International Journal on Smart Sensing and Intelligent Systems. Retrieved from http://www.s2is.org/icst-2014/papers/1569978141.pdf

Link to ACQUIRE

Preethichandra, D., & Eschenbach, E. (2013). Custom microcontroller platform increases student satisfaction, engagement and learning. In Proceedings of the 24th Annual Conference of the Australasian Association for Engineering Education (AAEE 2013), Work Integrated Learning : Applying Theory to Practice in Engineering Education, Crowne Plaza Hotel, Gold Coast, Queensland, December 8-11, 2013 (pp. 1-9). Brisbane, Queensland: Griffith University. Retrieved from http://www.engineersaustralia.org.au/

Link to ACQUIRE

Preethichandra, D. (2013). Design of a smart indoor air quality monitoring wireless sensor network for assisted living. In IEEE International Instrumentation and Measurement Technology Conference (I2MTC): Instrumentation and Measurement for Life. (pp. 1306-1310). NJ, USA: IEEE. doi:10.1109/I2MTC.2013.6555624

Link to ACQUIRE

Preethichandra, D. (2013). Enhancing sensitivity of glucose biosensors using pulsed deposition of polypyrrole on ITO substrate. In Book of Abstracts - 13th International Discussion and Conference on Nano-interface Controlled Electronic Devices (IDC-NICE 2013), October 16-19, 2013, R.C.C. Bunka Center, Hiroshima, Japan. (pp. 27-28). Tokyo: Tokyo Institute of Technology, Japan.

Link to ACQUIRE

Preethichandra, D., Ekanayake, M., & Kaneto, K. (2012). Characteristics of glucose biosensors with glucose oxidase deposited under high electric field. In International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 13th-16th May, 2012, Graz, Austria (pp. 1953-1956). NJ, USA: IEEE Explore. doi:10.1109/I2MTC.2012.6229587

Link to ACQUIRE

Preethichandra, D., Ekanayake, M., & Kaneto, K. (2012). Development of low-cost nano-biosensors to enhance the rural healthcare services. In 2012 Sixth International Conference on Sensing Technology (ICST). (pp. 163-166). United States: IEEE. Retrieved from http://dx.doi.org/10.1109/icsenst.2012.6461662

Link to ACQUIRE

Preethichandra, D., Ekanayake, M., & Kaneto, K. (2012). Enhanced glucose nano-biosensor by pulsed deposition of conducting polymer on ITO/Pt. In 2012 IEEE International Symposium on Medical Measurements and Applications Proceedings. (pp. 1-4). Piscataway, N.J.: IEEE.

Link to ACQUIRE

Preethichandra, D., Ekanayake, M., & Kaneto, K. (2012). Rural healthcare improvement through development of low-cost nano-biosensors. In Central Region Engineering Conference 2012 proceedings,10-11 August, 2012, Rockhampton, Queensland. (pp. 59-62). Rockhampton, Queensland: Engineers Australia. Retrieved from https://www.engineersaustralia.org.au/

Link to ACQUIRE

Preethichandra, D. (2012). Ultra low power indoor air quality monitoring sensor network. In Proceedings of the international conference on sustainable built environment (ICSBE2012). (pp. 53). Kandy, Sri Lanka: ICSBE.

Link to ACQUIRE

Preethichandra, D., & Kaneto, K. (2006). An easy fabrication method for artificial muscles and bending curvature sensors using ionic polymer metal composites. In First International Conference on Industrial and Information Systems, 8-11 August 2006, Peradeniya, Sri Lanka. (pp. 227-230). Piscataway, NJ: IEEE. doi:10.1109/ICIIS.2006.365728

Link to ACQUIRE

Preethichandra, D., & Kaneto, K. (2005). Bending curvature measurement using a SAW sensor fabricated on a polyvinylidine difluoride (PVDF) substrate. In Proceedings of the first international conference on sensing technology (ICST 2005) : Massey University, Palmerston North, New Zealand, November 21-23, 2005. (pp. 594-597). New Zealand: Institute of Information Sciences and Technology, Massey University. Retrieved from http://www-ist.massey.ac.nz/

Link to ACQUIRE

Samaranayake, B., Preethichandra, D., Alahakoon, S., & Kaneto, K. (2007). Bending curve modeling of ionic polymer metal composites in soft actuator applications. In 2007 IEEE Instrumentation and Measurement Technology Conference Proceedings (IMTC). Synergy of Science and Technology in Instrumentation and Measurement, Warsaw, Poland, May 1-3. (pp. 1-5). Piscataway, NJ: IEEE. doi:10.1109/IMTC.2007.379353

Link to ACQUIRE

Mala Ekanayake, E., Preethichandra, D., & Kaneto, K. (2007). Enhanced adsorption of glucose oxidase by introducing artificial porosity into polypyrrole based glucose biosensors. In 2007 IEEE Instrumentation and Measurement Technology Conference Proceedings (IMTC). Synergy of Science and Technology in Instrumentation and Measurement, Warsaw, Poland, May 1-3. (pp. 1-4). Piscataway, NJ: IEEE. doi:10.1109/IMTC.2007.378998

Link to ACQUIRE

Mala Ekanayake, E., Preethichandra, D., & Kaneto, K. (2007). Fabrication and characterization of nano-structured conducting polymer electrodes for glucose biosensor applications. In ICIIS 2007 : Second International Conference on Industrial and Information Systems - 2007 conference proceedings, 9-11 August 2007, University of Peradeniya, Sri Lanka. (pp. 63-66). Piscataway, NJ: IEEE. doi:10.1109/ICIINFS.2007.4579149

Link to ACQUIRE

Samaranayake, B., Preethichandra, D., Alahakoon, S., & Kaneto, K. (2007). Modeling simulation and design of ionic polymer metal composite soft actuators. In ICIIS 2007 : Second International Conference on Industrial and Information Systems - 2007 conference proceedings, 9-11 August 2007, University of Peradeniya, Sri Lanka. (pp. 455-460). Piscataway, NJ: IEEE. doi:10.1109/ICIINFS.2007.4579221

Link to ACQUIRE
Journal article

Gamage Preethichandra, D. M., Mala Ekanayake, E. M. I., & Onoda, M. (2017). Functional design of electrolytic biosensor. Journal of Physics: Conference Series, 924(Conference 1), 1-12. doi:10.1088/1742-6596/924/1/012010

Link to ACQUIRE

Preethichandra, D. M. G., Ekanayake, E. M. I. M., & Onoda, M. (2017). Electrophoretic enzyme deposition on nano-structured conducting polymer substrates for high sensitivity biosensors. Procedia Technology, 27, 65-66. doi:10.1016/j.protcy.2017.04.030

Link to ACQUIRE

Preethichandra, D., & Onoda, M. (2015). Functional design of electrochemical biosensors using polypyrrole. IEEJ transactions on electronics, information and systems., 135(2), 174-180. doi:10.1541/ieejeiss.135.174

Link to ACQUIRE

Preethichandra, D. (2013). An AFM study on polymers electrodeposited on active metals with different counter electrodes. Journal of selected areas in nanotechnology., 3(3), 1-5.

Link to ACQUIRE

Preethichandra, D. (2013). An experimental investigation on polypyrrole films electro-polymerized under a high transverse electric field. Applied mechanics and materials., 343, 77-83. doi:10.4028/www.scientific.net/AMM.343.77

Link to ACQUIRE

Samaranayake, B., Preethichandra, D., Alahakoon, S., & Kaneto, K. (2012). Dynamic modeling of Ionic Polymer Metal Composite using equivalent passive electric network components. Advanced materials research., (452-453), 1159-1163. Retrieved from http://dx.doi.org/10.4028/www.scientific.net/amr.452-453

Link to ACQUIRE

Alahakoon, S., Preethichandra, D., & Ekanayake, M. (2009). Sensor network applications in structures : a survey. Electronic journal of structural engineering., (Special issue 2009), 1-10. Retrieved from http://www.ejse.org/archives/fulltext/2009/special/2009sp1.pdf

Link to ACQUIRE

Mala Ekanayake, E., Preethichandra, D., & Kaneto, K. (2008). An amperometric glucose biosensor with enhanced measurement stability and sensitivity using an artificially porous conducting polymer. IEEE transactions on instrumentation and measurement., 57(8), 1621-1626. doi:10.1109/TIM.2008.922068

Link to ACQUIRE

Mala Ekanayake, E., Preethichandra, D., & Kaneto, K. (2008). Bi-functional amperometric biosensor for low concentration hydrogen peroxide measurements using polypyrrole immobilizing matrix. Sensors and actuators. B, Chemical., 132, 166-171. doi:10.1016/j.snb.2008.01.042

Link to ACQUIRE

Mala Ekanayake, E., Preethichandra, D., & Kaneto, K. (2008). Effect of glucose oxidase immobilizing techniques on performances of nano scale polypyrrole glucose biosensors. Japanese journal of applied physics., 47(2), 1321-1324. Retrieved from http://dx.doi.org/10.1143/jjap.47.1321

Link to ACQUIRE

Preethichandra, D., Thakur, A., Takashima, W., & Kaneto, K. (2007). A combined bi-ionic polymer actuator with unidirectional extension against bipolar excitations. Sensors and actuators. B, Chemical., 122, 587-590. doi:10.1016/j.snb.2006.07.002

Link to ACQUIRE

Thakur, A., Mukherjee, A., Preethichandra, D., Takashima, W., & Kaneto, K. (2007). Charge injection mechanism across the Au-poly (3-hexylthiophene-2,5-diyl) interface. Journal of applied physics., 101, 1-5. doi:10.1063/1.2734955

Link to ACQUIRE

Mala Ekanayake, E., Preethichandra, D., & Kaneto, K. (2007). Polypyrrole nanotube array sensor for enhanced adsorption of glucose oxidase in glucose biosensors. Biosensors and bioelectronics., 23, 107-113. Retrieved from http://dx.doi.org/10.1016/j.bios.2007.03.022

Link to ACQUIRE

Preethichandra, D., & Kaneto, K. (2007). SAW sensor network fabricated on a Polyvinylidine difluoride (PVDF) substrate for dynamic surface profile sensing. IEEE sensors journal., 7(5), 646-649. doi:10.1109/JSEN.2007.894911

Link to ACQUIRE
Higher Education
HE Term 2 - 2019
ENEX20001 - Embedded System Design
Unit Coordinator
ENEX13006 - Thermofluids Theory and Applications
Unit Profile Reviewer
ENEX13003 - Design of Mechatronics Elements
Unit Profile Reviewer
ENEX13001 - Instrumentation and Industrial Automation
Unit Coordinator
ENEX12002 - Introductory Electronics
Unit Profile Reviewer
ENEX12001 - Electrical Power and Machines
Unit Profile Reviewer
ENEE14006 - Embedded Microcontrollers
Unit Coordinator
HE Term 1 - 2019
ENTG13002 - Engineering Technology Project Planning
Lecturer
ENTG13001 - Engineering Technology Project Implementation
Lecturer
ENRP20003 - Engineering Research Project Implementation
Lecturer
ENRP20001 - Engineering Research Project Planning
Lecturer
ENEX20001 - Embedded System Design
Unit Coordinator
ENEX14001 - Mechatronics Systems Design
Unit Coordinator
ENEX13005 - Machine Design and Vibrations
Unit Profile Reviewer
ENEX13004 - Advanced Dynamics and Robotics
Unit Profile Reviewer
ENEX13002 - Power Electronics
Unit Profile Reviewer
ENEG14005 - Engineering Honours Project Implementation
Lecturer
ENEG14003 - Engineering Honours Project Planning
Lecturer
ENEE14006 - Embedded Microcontrollers
Unit Coordinator
ENEE13020 - Digital Electronics
Unit Profile Reviewer
HE Term 3 - 2018
ENEX20001 - Embedded System Design
Unit Profile Reviewer
HE Term 2 - 2018
ENTG13002 - Engineering Technology Project Planning
Lecturer
ENTG13001 - Engineering Technology Project Implementation
Lecturer
ENRP20003 - Engineering Research Project Implementation
Lecturer
ENRP20001 - Engineering Research Project Planning
Lecturer
ENEX20001 - Embedded System Design
Unit Coordinator
ENEX14001 - Mechatronics Systems Design
Unit Coordinator
ENEX13006 - Thermofluids Theory and Applications
Unit Profile Reviewer
ENEX13003 - Design of Mechatronics Elements
Unit Profile Reviewer
ENEX13002 - Power Electronics
Unit Coordinator
ENEX13001 - Instrumentation and Industrial Automation
Unit Coordinator
ENEX12002 - Introductory Electronics
Unit Profile Reviewer
ENEX12001 - Electrical Power and Machines
Unit Profile Reviewer
ENEG14005 - Engineering Honours Project Implementation
Lecturer
ENEG14003 - Engineering Honours Project Planning
Lecturer
ENEE14006 - Embedded Microcontrollers
Unit Coordinator
HE Term 1 - 2018
ENTG13002 - Engineering Technology Project Planning
Lecturer
ENTG13001 - Engineering Technology Project Implementation
Lecturer
ENEX20001 - Embedded System Design
Unit Coordinator
ENEX13005 - Machine Design and Vibrations
Exam Reviewer
ENEX13004 - Advanced Dynamics and Robotics
Exam Reviewer
ENEX13002 - Power Electronics
Unit Coordinator
ENEG14005 - Engineering Honours Project Implementation
Lecturer
ENEG14003 - Engineering Honours Project Planning
Lecturer
ENEE14006 - Embedded Microcontrollers
Unit Coordinator
ENEE13020 - Digital Electronics
Unit Profile Reviewer
HE Term 2 - 2017
ENMM20023 - Introduction to Asset and Maintenance Management
Tutor
ENEX13003 - Design of Mechatronics Elements
Lecturer
ENEX13002 - Power Electronics
Unit Coordinator
ENEX13001 - Instrumentation and Industrial Automation
Unit Coordinator
ENEX12002 - Introductory Electronics
Tutor
ENEX12001 - Electrical Power and Machines
Lecturer
ENEG14005 - Engineering Honours Project Implementation
Unit Profile Reviewer
HE Term 1 - 2017
ENEX13004 - Advanced Dynamics and Robotics
Unit Profile Reviewer
ENEX13002 - Power Electronics
Unit Coordinator
ENEG14005 - Engineering Honours Project Implementation
Unit Profile Reviewer
ENEE14006 - Embedded Microcontrollers
Unit Coordinator
HE Term 2 - 2016
ENEX12002 - Introductory Electronics
Lead Lecturer
ENEP12010 - Industry Practice 2
Lecturer
ENEE14006 - Embedded Microcontrollers
Unit Coordinator
HE Term 1 - 2016
ENEE13020 - Digital Electronics
Unit Coordinator
ENAE12004 - Industrial Data Communications
Unit Profile Reviewer
HE Term 2 - 2015
ENTG13002 - Technology Project Planning
Unit Profile Reviewer
ENEG14003 - Engineering Project Planning
Unit Profile Reviewer
ENEE14006 - Embedded Microcontrollers
Unit Coordinator
ENEE14004 - Electronic Communications
Unit Profile Reviewer
HE Term 1 - 2015
ENEE14005 - Capstone Power and Control Design
Unit Profile Reviewer
ENEE13020 - Digital Electronics
Unit Coordinator
ENAE12004 - Industrial Data Communications
Unit Profile Reviewer
HE Term 2 - 2014
ENEG12006 - Engineering Design & Management Implementation
Lecturer
ENEE14006 - Embedded Microcontrollers
Unit Coordinator
ENEE14004 - Electronic Communications
Unit Profile Reviewer
ENEE13018 - Analogue Electronics
Unit Profile Reviewer
ENAE12015 - Analogue Devices and Applications
Unit Profile Reviewer
HE Term 1 - 2014
ENEE14005 - Capstone Power and Control Design
Unit Coordinator
ENEE13020 - Digital Electronics
Unit Coordinator
ENEE13019 - Control Systems Analysis and Design
Unit Coordinator
ENEE12014 - Electrical Circuit Analysis
Unit Profile Reviewer
ENAR12004 - Mine Management and Safety
Unit Profile Reviewer
ENAE12014 - Digital Devices and Applications
Unit Coordinator
ENAE12013 - Electrical Components and Circuit Analysis
Unit Profile Reviewer
ENAE12002 - Computer Aided Drafting Design (Electrical/Electronic)
Unit Profile Reviewer
HE Term 2 - 2013
ENEG12006 - Engineering Design & Management Implementation
Lecturer
ENEE14006 - Embedded Microcontrollers
Unit Coordinator
ENEE14004 - Electronic Communications
Unit Profile Reviewer
ENEE13021 - Power System Analysis and Design
Unit Profile Reviewer
ENEE12015 - Electrical Power Engineering
Unit Profile Reviewer
ENAE12007 - Electrical Power Systems
Unit Profile Reviewer
HE Term 1 - 2013
ENTG13002 - Technology Project Planning
Lecturer
ENTG13001 - Technology Project Implementation
Lecturer
ENEG14005 - Engineering Project Implementation
Lecturer
ENEG14003 - Engineering Project Planning
Lecturer
ENEG12004 - Engineering Design & Management Planning
Tutor
ENEE14005 - Capstone Power and Control Design
Unit Coordinator
ENEE13020 - Digital Electronics
Unit Coordinator
ENEE13016 - Power System Protection
Unit Profile Reviewer
ENEE13014 - Machines, Drives & Control
Unit Profile Reviewer
ENEE12014 - Electrical Circuit Analysis
Tutor
ENAE12014 - Digital Devices and Applications
Unit Coordinator
ENAE12006 - Electrical Machines and Drives
Unit Profile Reviewer
HE Term 2 - 2012
ENEG12006 - Engineering Design & Management Implementation
Unit Profile Reviewer
ENEE14006 - Embedded Microcontrollers
Unit Coordinator
ENEE14004 - Electronic Communications
Unit Profile Reviewer
HE Term 1 - 2012
ENEG12004 - Engineering Design & Management Planning
Unit Profile Reviewer
ENEE13020 - Digital Electronics
Unit Coordinator
ENEE13014 - Machines, Drives & Control
Unit Profile Reviewer
ENEE12014 - Electrical Circuit Analysis
Lead Lecturer
ENAE12014 - Digital Devices and Applications
Unit Coordinator
ENAE12006 - Electrical Machines and Drives
Unit Profile Reviewer
HE Term 2 - 2011
ENEE14006 - Embedded Microcontrollers
Unit Coordinator
HE Term 1 - 2011
ENEE14005 - Capstone Power and Control Design
Unit Coordinator
Vocational Education and Training